Details

National Loop Co. 84' (6' X 36') Saw Cut Vehicle Detection Loop with 150' Lead-In for 42' Wide Driveways - X-NL42-18-150

A preformed 18 AWG inductive loop built for saw-cut installation, the National Loop Co. 84' Saw Cut Vehicle Detection Loop with 150' Lead-In detects vehicles passing over the driveway. Working through a compatible loop detector, it detects the metal mass of vehicles above, satisfying the non-contact detection that UL 325 lists as one of its two required means of entrapment protection. Fitting takes one shallow saw cut: a 3/16" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. With the 36' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits wide industrial driveways, truck wash facilities, and large church or school parking lot entrances.

Features:

• Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
• Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
• Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
• Optimizes read range, eliminates faulty signals, and minimizes callbacks
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters

Specifications:

• Loop type: Saw cut
• Total loop length: 84'
• Loop dimensions: 6' x 36'
• Lead-in length: 150'
• Slot size: 3/16" wide x 1" deep
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 42'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes