National Loop Co. 17' (2.5' X 6') Saw Cut Vehicle Detection Loop with 250' Lead-In for 8.5' Wide Driveways - X-NL8.5-18-250

National Loop Co. 17' (2.5' X 6') Saw Cut Vehicle Detection Loop with 250' Lead-In for 8.5' Wide Driveways - X-NL8.5-18-250

The National Loop Co. 17' Saw Cut Vehicle Detection Loop with 250' of lead-in to reach the detector signals the gate operator the moment traffic appears, counts as one of the two means of entrapment protection UL 325 expects from automatic gates. Crews cut a narrow channel in the finished pavement, set the preformed wire inside, and seal it against moisture. Total wire runs 17' in a 2.5' x 6' pattern made for 8.5' wide driveways, including single-car gravel drives in rural areas and tight older lots.
Part Number: X-NL8.5-18-250
$232.97 each $232.97 each
OR

Details

National Loop Co. 17' (2.5' X 6') Saw Cut Vehicle Detection Loop with 250' Lead-In for 8.5' Wide Driveways - X-NL8.5-18-250

Gate installers can turn an existing driveway into part of the safety system with the National Loop Co. 17' Saw Cut Vehicle Detection Loop with 250' Lead-In, a preformed 18 AWG inductive loop. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Fitting takes one shallow saw cut: a 3/16" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. With the 6' side crossing the lane and about 1' 3" of clearance per edge, and the 2.5' side capturing vehicles in the direction of travel, the layout fits older urban row homes, narrow driveways, and single-car gravel drives in rural areas.

Features:

  • Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations

Specifications:

  • Loop type: Saw cut
  • Total loop length: 17'
  • Loop dimensions: 2.5' x 6'
  • Lead-in length: 250'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 8.5'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL8.5-18-250?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 250'
Loop Length Size 2.5' X 6'
Total Loop Length 17'
Wire Size 3/16"
SKU X-NL8.5-18-250
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file