Details

National Loop Co. 92' (6' X 40') Saw Cut Vehicle Detection Loop with 200' Lead-In for 46' Wide Driveways - X-NL46-18-200

Built for retrofitting an existing paved driveway, the National Loop Co. 92' Saw Cut Vehicle Detection Loop with 200' Lead-In is a factory-wound 18 AWG inductive loop ready to lay into a saw-cut slot. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Setup is a 3-step process: saw a 3/16" slot 1" deep in the pavement, press the loop in, and seal over it. With the 40' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits freight terminals, large agricultural processing plants, and wide estate boulevard gates.

Features:

• More cost-effective than hand-wound loop installations
• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
• Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
• Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
• Optimizes read range, eliminates faulty signals, and minimizes callbacks

Specifications:

• Loop type: Saw cut
• Total loop length: 92'
• Loop dimensions: 6' x 40'
• Lead-in length: 200'
• Slot size: 3/16" wide x 1" deep
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 46'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes