National Loop Co. 80' (6' X 34') Saw Cut Vehicle Detection Loop with 175' Lead-In for 40' Wide Driveways - X-NL40-18-175

National Loop Co. 80' (6' X 34') Saw Cut Vehicle Detection Loop with 175' Lead-In for 40' Wide Driveways - X-NL40-18-175

Sensing traffic through the pavement itself, the National Loop Co. 80' Saw Cut Vehicle Detection Loop with a 175' lead-in stands in as the gate system's non-contact vehicle detection. The pavement stays in service, as only a narrow 1" slot is opened to receive the wire and then sealed. The rectangle measures 6' x 34', putting 80' of wire to work across 40' wide driveways like distribution centers, heavy equipment dealerships, and semi-truck yards.
Part Number: X-NL40-18-175
$327.93 each $327.93 each
OR

Details

National Loop Co. 80' (6' X 34') Saw Cut Vehicle Detection Loop with 175' Lead-In for 40' Wide Driveways - X-NL40-18-175

Designed to sense vehicles without any surface teardown, the National Loop Co. 80' Saw Cut Vehicle Detection Loop with 175' Lead-In is a preformed 18 AWG loop that drops into a saw-cut slot. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator dependable non-contact detection. Installation calls for sawing a 3/16" slot 1" deep into existing asphalt or concrete, laying the loop in the slot, and sealing it, with no hand-winding or turn counting required. Its 34' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to distribution centers, heavy equipment dealerships, and semi-truck yards.

Features:

  • Saves labor cost compared with winding a loop by hand in the field
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding

Specifications:

  • Loop type: Saw cut
  • Total loop length: 80'
  • Loop dimensions: 6' x 34'
  • Lead-in length: 175'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 40'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL40-18-175?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 175'
Loop Length Size 6' X 34'
Total Loop Length 80'
Wire Size 3/16"
SKU X-NL40-18-175
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file