National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 200' Lead-In for 36' Wide Driveways - X-NL36-18-200

National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 200' Lead-In for 36' Wide Driveways - X-NL36-18-200

The National Loop Co. 72' Saw Cut Vehicle Detection Loop with 200' of lead-in to reach the detector signals the gate operator the moment traffic appears, supplies one of the two means of entrapment protection UL 325 lists for gate systems. Retrofit jobs go quickly, since the loop simply presses into a saw-cut slot and seals in place. Shaped as a 6' x 30' rectangle, its 72' of wire suits 36' driveways such as agricultural processing entrances and heavy equipment yards.
Part Number: X-NL36-18-200
$326.77 each $326.77 each
OR
 

Details

National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 200' Lead-In for 36' Wide Driveways - X-NL36-18-200

Designed to sense vehicles without any surface teardown, the National Loop Co. 72' Saw Cut Vehicle Detection Loop with 200' Lead-In is a preformed 18 AWG loop that drops into a saw-cut slot. Wired to compatible automated system, the loop counts as one of the two means of entrapment protection UL 325 requires for gate operators, detecting the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Fitting takes one shallow saw cut: a 3/16" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. Its 30' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to truck yards, heavy equipment facilities, and agricultural processing entrances.

Features:

  • Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Saw cut
  • Total loop length: 72'
  • Loop dimensions: 6' x 30'
  • Lead-in length: 200'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 36'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL36-18-200?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 200'
Loop Length Size 6' X 30'
Total Loop Length 72'
Wire Size 3/16"
SKU X-NL36-18-200
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file