National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 20' Lead-In for 36' Wide Driveways - X-NL36-18-20
Details
National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 20' Lead-In for 36' Wide Driveways - X-NL36-18-20
Sized to match a specific driveway width, the National Loop Co. 72' Saw Cut Vehicle Detection Loop with 20' Lead-In is a factory-wound 18 AWG loop for retrofit installations. Paired with a compatible loop detector, it senses the metal mass of a passing car or truck and signals the gate operator to open, hold, or reverse, providing one of the two means of entrapment protection UL 325 requires for automated gates. Installation calls for sawing a 3/16" slot 1" deep into existing asphalt or concrete, laying the loop in the slot, and sealing it, with no hand-winding or turn counting required. With the 30' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits truck yards, heavy equipment facilities, and agricultural processing entrances.
Features:
- Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
- Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
- More cost-effective than hand-wound loop installations
- Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
- Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
- Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
- Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
Specifications:
- Loop type: Saw cut
- Total loop length: 72'
- Loop dimensions: 6' x 30'
- Lead-in length: 20'
- Slot size: 3/16" wide x 1" deep
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 36'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Saw Cut |
|---|---|
| Lead-In Length | 20' |
| Loop Length Size | 6' X 30' |
| Total Loop Length | 72' |
| Wire Size | 3/16" |
| SKU | X-NL36-18-20 |
| Product Type | Saw Cut Preformed Loop |
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |
| Specification Sheet | Download PDF file |