National Loop Co. 68' (6' X 28') Saw Cut Vehicle Detection Loop with 250' Lead-In for 34' Wide Driveways - X-NL34-18-250
Details
National Loop Co. 68' (6' X 28') Saw Cut Vehicle Detection Loop with 250' Lead-In for 34' Wide Driveways - X-NL34-18-250
Gate installers can turn an existing driveway into part of the safety system with the National Loop Co. 68' Saw Cut Vehicle Detection Loop with 250' Lead-In, a preformed 18 AWG inductive loop. Wired to compatible automated system, the loop counts as one of the two means of entrapment protection UL 325 requires for gate operators, detecting the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Installation calls for sawing a 3/16" slot 1" deep into existing asphalt or concrete, laying the loop in the slot, and sealing it, with no hand-winding or turn counting required. Its 28' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to industrial or municipal lots and large estate entrances.
Features:
- Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
- Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
- More cost-effective than hand-wound loop installations
- Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
- Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
- Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
- Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
Specifications:
- Loop type: Saw cut
- Total loop length: 68'
- Loop dimensions: 6' x 28'
- Lead-in length: 250'
- Slot size: 3/16" wide x 1" deep
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 34'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Saw Cut |
|---|---|
| Lead-In Length | 250' |
| Loop Length Size | 6' X 28' |
| Total Loop Length | 68' |
| Wire Size | 3/16" |
| SKU | X-NL34-18-250 |
| Product Type | Saw Cut Preformed Loop |
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |
| Specification Sheet | Download PDF file |