National Loop Co. 64' (6' X 26') Saw Cut Vehicle Detection Loop with 100' Lead-In for 32' Wide Driveways - X-NL32-18-100

National Loop Co. 64' (6' X 26') Saw Cut Vehicle Detection Loop with 100' Lead-In for 32' Wide Driveways - X-NL32-18-100

The National Loop Co. 64' Saw Cut Vehicle Detection Loop with 100' Lead-In senses the metal of passing vehicles and tells the gate system to open. Wired to a compatible loop detector, it keeps the gate from closing on a waiting vehicle. Crews cut a narrow channel in the existing driveway, set the factory-wound loop inside, and seal it against moisture. Shaped 6' x 26', its 64' of 18 AWG wire spans the lane on 32' wide driveways, from church and school lot entries plus light industrial drives.
Part Number: X-NL32-18-100
$223.71 each $223.71 each
OR
 

Details

National Loop Co. 64' (6' X 26') Saw Cut Vehicle Detection Loop with 100' Lead-In for 32' Wide Driveways - X-NL32-18-100

Built for retrofitting an existing paved driveway, the National Loop Co. 64' Saw Cut Vehicle Detection Loop with 100' Lead-In is a factory-wound 18 AWG inductive loop ready to lay into a saw-cut slot. Wired to a compatible automated system, the loop detects the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Fitting takes one shallow saw cut: a 3/16" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. With the 26' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits light industrial driveways and church or school lot entries.

Features:

  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters

Specifications:

  • Loop type: Saw cut
  • Total loop length: 64'
  • Loop dimensions: 6' x 26'
  • Lead-in length: 100'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 32'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL32-18-100?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 100'
Loop Length Size 6' X 26'
Total Loop Length 64'
Wire Size 3/16"
SKU X-NL32-18-100
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file