National Loop Co. 56' (6' X 22') Saw Cut Vehicle Detection Loop with 30' Lead-In for 28' Wide Driveways - X-NL28-18-30
Details
National Loop Co. 56' (6' X 22') Saw Cut Vehicle Detection Loop with 30' Lead-In for 28' Wide Driveways - X-NL28-18-30
Contractors reach for the National Loop Co. 56' Saw Cut Vehicle Detection Loop with 30' Lead-In when an existing asphalt or concrete drive needs reliable vehicle detection. Once a loop detector reads its signal, the loop provides the non-contact vehicle detection automated gates rely on. Installers saw a 3/16" by 1" deep slot into the existing surface, drop the prewound loop in, and seal the slot against moisture. Its 22' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to apartment complex entrances and farm or agricultural property gates.
Features:
- Saves labor cost compared with winding a loop by hand in the field
- Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
- One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
- Factory-set turn count means optimal read range without any on-site adjustment
- Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
- Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
Specifications:
- Loop type: Saw cut
- Total loop length: 56'
- Loop dimensions: 6' x 22'
- Lead-in length: 30'
- Slot size: 3/16" wide x 1" deep
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 28'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Saw Cut |
|---|---|
| Lead-In Length | 30' |
| Loop Length Size | 6' X 22' |
| Total Loop Length | 56' |
| Wire Size | 3/16" |
| SKU | X-NL28-18-30 |
| Product Type | Saw Cut Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |
| Specification Sheet | Download PDF file |