National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 125' Lead-In for 26' Wide Driveways - X-NL26-18-125

National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 125' Lead-In for 26' Wide Driveways - X-NL26-18-125

The National Loop Co. 52' Saw Cut Vehicle Detection Loop with 125' Lead-In picks up cars, trucks, and trailers as they cross the lane so the gate opens by itself. A saw, a 1" cut, and a bead of sealant put this loop to work in finished asphalt or concrete. Its 6' x 20' shape carries 52' of 18 AWG wire, the right footprint for 26' wide driveways including 3-car-wide residential drives and light commercial entries.
Part Number: X-NL26-18-125
$239.69 each $239.69 each
OR
 

Details

National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 125' Lead-In for 26' Wide Driveways - X-NL26-18-125

The National Loop Co. 52' Saw Cut Vehicle Detection Loop with 125' Lead-In is a preformed 18 AWG inductive vehicle detection loop that arrives ready to drop into a saw-cut slot. Wired to a compatible automated system, the loop detects the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Fitting takes one shallow saw cut: a 3/16" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. With the 20' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits 3-car-wide residential drives and light commercial entries.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Saw cut
  • Total loop length: 52'
  • Loop dimensions: 6' x 20'
  • Lead-in length: 125'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 26'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL26-18-125?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 125'
Loop Length Size 6' X 20'
Total Loop Length 52'
Wire Size 3/16"
SKU X-NL26-18-125
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file