National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 100' Lead-In for 26' Wide Driveways - X-NL26-18-100

National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 100' Lead-In for 26' Wide Driveways - X-NL26-18-100

The National Loop Co. 52' Saw Cut Vehicle Detection Loop with 100' Lead-In turns passing traffic into gate commands, opening for cars and trucks without a keypad or remote. Wired to a compatible loop detector, it keeps the gate from closing on a waiting vehicle. Crews cut a narrow channel in the existing driveway, set the factory-wound loop inside, and seal it against moisture. Total wire runs 52' in a 6' x 20' layout, with 18 AWG conductors sized to 26' wide driveways at light commercial entries and roomy 3-car residential drives.
Part Number: X-NL26-18-100
$212.58 each $212.58 each
OR

Details

National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 100' Lead-In for 26' Wide Driveways - X-NL26-18-100

The National Loop Co. 52' Saw Cut Vehicle Detection Loop with 100' Lead-In is a preformed 18 AWG inductive vehicle detection loop that arrives ready to drop into a saw-cut slot. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Installers saw a 3/16" by 1" deep slot into the existing surface, drop the prewound loop in, and seal the slot against moisture. With the 20' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits 3-car-wide residential drives and light commercial entries.

Features:

  • Saves labor cost compared with winding a loop by hand in the field
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding

Specifications:

  • Loop type: Saw cut
  • Total loop length: 52'
  • Loop dimensions: 6' x 20'
  • Lead-in length: 100'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 26'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL26-18-100?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 100'
Loop Length Size 6' X 20'
Total Loop Length 52'
Wire Size 3/16"
SKU X-NL26-18-100
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file