National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 250' Lead-In for 25' Wide Driveways - X-NL25-18-250

National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 250' Lead-In for 25' Wide Driveways - X-NL25-18-250

Behind every loop detector sits a coil of wire, and the National Loop Co. 50' Saw Cut Vehicle Detection Loop with 250' of lead-in wire catches every vehicle that crosses its rectangle. The pavement stays in service, as only a narrow 1" slot is opened to receive the wire and then sealed. The rectangle measures 6' x 19', putting 50' of wire to work across 25' wide driveways like estate properties, horse farms, and private road entrances.
Part Number: X-NL25-18-250
$299.69 each $299.69 each
OR

Details

National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 250' Lead-In for 25' Wide Driveways - X-NL25-18-250

Because it arrives prewound and precut, the National Loop Co. 50' Saw Cut Vehicle Detection Loop with 250' Lead-In takes the guesswork out of adding vehicle detection to an existing driveway. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Installation calls for sawing a 3/16" slot 1" deep into existing asphalt or concrete, laying the loop in the slot, and sealing it, with no hand-winding or turn counting required. Its 19' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to estate properties, horse farms, and private road entrances.

Features:

  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range

Specifications:

  • Loop type: Saw cut
  • Total loop length: 50'
  • Loop dimensions: 6' x 19'
  • Lead-in length: 250'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 25'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL25-18-250?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 250'
Loop Length Size 6' X 19'
Total Loop Length 50'
Wire Size 3/16"
SKU X-NL25-18-250
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file