National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 125' Lead-In for 25' Wide Driveways - X-NL25-18-125

National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 125' Lead-In for 25' Wide Driveways - X-NL25-18-125

The National Loop Co. 50' Saw Cut Vehicle Detection Loop with 125' Lead-In senses the metal of passing vehicles and tells the gate system to open. The signal gives the gate system reliable vehicle detection, a must for safe automatic operation. Crews cut a narrow channel in the existing driveway, set the factory-wound loop inside, and seal it against moisture. Shaped 6' x 19', its 50' of 18 AWG wire spans the lane on 25' wide driveways, from horse farms, private roads, and estate properties.
Part Number: X-NL25-18-125
$235.98 each $235.98 each
OR
 

Details

National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 125' Lead-In for 25' Wide Driveways - X-NL25-18-125

Built for retrofitting an existing paved driveway, the National Loop Co. 50' Saw Cut Vehicle Detection Loop with 125' Lead-In is a factory-wound 18 AWG inductive loop ready to lay into a saw-cut slot. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator dependable non-contact detection. Fitting takes one shallow saw cut: a 3/16" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. With the 19' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits estate properties, horse farms, and private road entrances.

Features:

  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations

Specifications:

  • Loop type: Saw cut
  • Total loop length: 50'
  • Loop dimensions: 6' x 19'
  • Lead-in length: 125'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 25'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL25-18-125?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 125'
Loop Length Size 6' X 19'
Total Loop Length 50'
Wire Size 3/16"
SKU X-NL25-18-125
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file