National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 100' Lead-In for 25' Wide Driveways - X-NL25-18-100

National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 100' Lead-In for 25' Wide Driveways - X-NL25-18-100

The National Loop Co. 50' Saw Cut Vehicle Detection Loop with 100' Lead-In alerts the gate operator the instant a vehicle crosses the wire. Vehicle detection like this prevents the gate from closing on traffic. A saw, a 1" cut, and a bead of sealant put this loop to work in finished asphalt or concrete. Shaped 6' x 19', its 50' of 18 AWG wire spans the lane on 25' wide driveways, from estate properties, horse farms, and private road entrances.
Part Number: X-NL25-18-100
$208.87 each $208.87 each
OR

Details

National Loop Co. 50' (6' X 19') Saw Cut Vehicle Detection Loop with 100' Lead-In for 25' Wide Driveways - X-NL25-18-100

Designed to sense vehicles without any surface teardown, the National Loop Co. 50' Saw Cut Vehicle Detection Loop with 100' Lead-In is a preformed 18 AWG loop that drops into a saw-cut slot. Working through a compatible loop detector, it detects the metal mass of vehicles above. Fitting takes one shallow saw cut: a 3/16" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. With the 19' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits estate properties, horse farms, and private road entrances.

Features:

  • Saves labor cost compared with winding a loop by hand in the field
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding

Specifications:

  • Loop type: Saw cut
  • Total loop length: 50'
  • Loop dimensions: 6' x 19'
  • Lead-in length: 100'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 25'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL25-18-100?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 100'
Loop Length Size 6' X 19'
Total Loop Length 50'
Wire Size 3/16"
SKU X-NL25-18-100
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file