National Loop Co. 44' (6' X 16') Saw Cut Vehicle Detection Loop with 200' Lead-In for 22' Wide Driveways - X-NL22-18-200

National Loop Co. 44' (6' X 16') Saw Cut Vehicle Detection Loop with 200' Lead-In for 22' Wide Driveways - X-NL22-18-200

Monitoring the driveway around the clock, the National Loop Co. 44' Saw Cut Vehicle Detection Loop with 200' of lead-in to reach the detector supplies the vehicle detection gate systems rely on. Installers groove the existing drive, tuck the loop into the slot, and close it up with loop sealant. With 44' of wire laid out 6' x 16', it covers the lane on 22' wide driveways such as small HOA lots and estate home entries.
Part Number: X-NL22-18-200
$263.09 each $263.09 each
OR
 

Details

National Loop Co. 44' (6' X 16') Saw Cut Vehicle Detection Loop with 200' Lead-In for 22' Wide Driveways - X-NL22-18-200

Made for gate and access-control upgrades, the National Loop Co. 44' Saw Cut Vehicle Detection Loop with 200' Lead-In is an 18 AWG inductive loop, machine-wound and ready to seal into existing pavement. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Setup is a 3-step process: saw a 3/16" slot 1" deep in the pavement, press the loop in, and seal over it. With the 16' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits estate homes and small HOA or church parking lot entries.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Saw cut
  • Total loop length: 44'
  • Loop dimensions: 6' x 16'
  • Lead-in length: 200'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 22'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL22-18-200?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 200'
Loop Length Size 6' X 16'
Total Loop Length 44'
Wire Size 3/16"
SKU X-NL22-18-200
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file