National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 225' Lead-In for 19' Wide Driveways - X-NL19-18-225

National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 225' Lead-In for 19' Wide Driveways - X-NL19-18-225

The National Loop Co. 38' Saw Cut Vehicle Detection Loop with 225' Lead-In keeps an automatic gate working on its own, opening the moment a vehicle pulls up. A saw, a 1" cut, and a bead of sealant put this loop to work in finished asphalt or concrete. Its 38' of 18 AWG wire forms a 6' x 13' rectangle sized for 19' wide driveways, including 2-car drives with extra walkway room and estate-style rural homes.
Part Number: X-NL19-18-225
$264.71 each $264.71 each
OR
 

Details

National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 225' Lead-In for 19' Wide Driveways - X-NL19-18-225

Sized to match a specific driveway width, the National Loop Co. 38' Saw Cut Vehicle Detection Loop with 225' Lead-In is a factory-wound 18 AWG loop for retrofit installations. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Installers saw a 3/16" by 1" deep slot into the existing surface, drop the prewound loop in, and seal the slot against moisture. With the 13' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits 2-car drives with extra walkway room and estate-style rural homes.

Features:

  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations

Specifications:

  • Loop type: Saw cut
  • Total loop length: 38'
  • Loop dimensions: 6' x 13'
  • Lead-in length: 225'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 19'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL19-18-225?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 225'
Loop Length Size 6' X 13'
Total Loop Length 38'
Wire Size 3/16"
SKU X-NL19-18-225
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file