National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 20' Lead-In for 19' Wide Driveways - X-NL19-18-20

National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 20' Lead-In for 19' Wide Driveways - X-NL19-18-20

Monitoring the driveway around the clock, the National Loop Co. 38' Saw Cut Vehicle Detection Loop with 20' of lead-in to reach the detector provides the non-contact vehicle detection automatic gates rely on. It installs through a 1" deep saw cut in existing asphalt or concrete, so the finished surface stays largely intact. Formed as a 6' x 13' rectangle with 38' of perimeter, it matches the 19' drives found at estate-style rural homes and 2-car drives with walkway space.
Part Number: X-NL19-18-20
$150.96 each $150.96 each
OR
 

Details

National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 20' Lead-In for 19' Wide Driveways - X-NL19-18-20

Wound from one continuous length of 18 AWG wire, the National Loop Co. 38' Saw Cut Vehicle Detection Loop with 20' Lead-In installs in an existing paved surface through a simple saw-cut slot. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Installation calls for sawing a 3/16" slot 1" deep into existing asphalt or concrete, laying the loop in the slot, and sealing it, with no hand-winding or turn counting required. The 13' side covers the travel lane with roughly 3' of clearance on each side, and the 6' side reads vehicles as they roll through, making it a fit for 2-car drives with extra walkway room and estate-style rural homes.

Features:

  • More cost-effective than hand-wound loop installations
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of XLP-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks

Specifications:

  • Loop type: Saw cut
  • Total loop length: 38'
  • Loop dimensions: 6' x 13'
  • Lead-in length: 20'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 19'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL19-18-20?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 20'
Loop Length Size 6' X 13'
Total Loop Length 38'
Wire Size 3/16"
SKU X-NL19-18-20
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file