National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 175' Lead-In for 19' Wide Driveways - X-NL19-18-175

National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 175' Lead-In for 19' Wide Driveways - X-NL19-18-175

Behind every loop detector sits a coil of wire, and the National Loop Co. 38' Saw Cut Vehicle Detection Loop with 175' of lead-in wire catches every vehicle that crosses its rectangle. Crews cut a narrow channel in the finished pavement, set the preformed wire inside, and seal it against moisture. Total wire runs 38' in a 6' x 13' pattern made for 19' wide driveways, including 2-car drives with extra walkway room and estate-style rural homes.
Part Number: X-NL19-18-175
$239.22 each $239.22 each
OR
 

Details

National Loop Co. 38' (6' X 13') Saw Cut Vehicle Detection Loop with 175' Lead-In for 19' Wide Driveways - X-NL19-18-175

Installing the National Loop Co. 38' Saw Cut Vehicle Detection Loop with 175' Lead-In means sawing one slot, laying in a preformed 18 AWG loop, and sealing it. Working through a compatible loop detector, it detects the metal mass of vehicles above. Installers saw a 3/16" by 1" deep slot into the existing surface, drop the prewound loop in, and seal the slot against moisture. Its 13' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to 2-car drives with extra walkway room and estate-style rural homes.

Features:

  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters

Specifications:

  • Loop type: Saw cut
  • Total loop length: 38'
  • Loop dimensions: 6' x 13'
  • Lead-in length: 175'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 19'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL19-18-175?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 175'
Loop Length Size 6' X 13'
Total Loop Length 38'
Wire Size 3/16"
SKU X-NL19-18-175
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file