National Loop Co. 36' (6' X 12') Saw Cut Vehicle Detection Loop with 75' Lead-In for 18' Wide Driveways - X-NL18-18-75

National Loop Co. 36' (6' X 12') Saw Cut Vehicle Detection Loop with 75' Lead-In for 18' Wide Driveways - X-NL18-18-75

The National Loop Co. 36' Saw Cut Vehicle Detection Loop with its 75' lead-in feels the metal of a passing vehicle through the surface. Installation calls for a 1" deep slot saw cut into the existing asphalt or concrete, with the loop pressed in and the cut sealed. Its 36' of wire forms a 6' x 12' rectangle sized for 18' wide driveways at small commercial entries and generous 2-car drives.
Part Number: X-NL18-18-75
$171.81 each $171.81 each
OR

Details

National Loop Co. 36' (6' X 12') Saw Cut Vehicle Detection Loop with 75' Lead-In for 18' Wide Driveways - X-NL18-18-75

A preformed 18 AWG inductive loop built for saw-cut installation, the National Loop Co. 36' Saw Cut Vehicle Detection Loop with 75' Lead-In detects vehicles passing over the driveway. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Setup is a 3-step process: saw a 3/16" slot 1" deep in the pavement, press the loop in, and seal over it. Its 12' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to roomy 2-car driveways and small commercial entries.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Saw cut
  • Total loop length: 36'
  • Loop dimensions: 6' x 12'
  • Lead-in length: 75'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 18'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL18-18-75?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 75'
Loop Length Size 6' X 12'
Total Loop Length 36'
Wire Size 3/16"
SKU X-NL18-18-75
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file