National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 50' Lead-In for 16' Wide Driveways - X-NL16-18-50

National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 50' Lead-In for 16' Wide Driveways - X-NL16-18-50

The National Loop Co. 32' Saw Cut Vehicle Detection Loop with a 50' lead-in knows when a vehicle is sitting in the lane. Crews cut a narrow channel in the finished pavement, set the preformed wire inside, and seal it against moisture. Total wire runs 32' in a 4' x 12' pattern made for 16' wide driveways, including common 2-car suburban driveways and small apartment building lots.
Part Number: X-NL16-18-50
$153.18 each $153.18 each
OR

Details

National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 50' Lead-In for 16' Wide Driveways - X-NL16-18-50

Because it arrives prewound and precut, the National Loop Co. 32' Saw Cut Vehicle Detection Loop with 50' Lead-In takes the guesswork out of adding vehicle detection to an existing driveway. Once a loop detector reads its signal, the loop provides the non-contact vehicle detection automated gates rely on. Fitting takes one shallow saw cut: a 3/16" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. Its 12' side spans the travel lane while the 4' side runs in the direction of traffic, leaving roughly 2' of clearance on each edge, an arrangement well suited to common 2-car suburban driveways and small apartment building lots.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Saw cut
  • Total loop length: 32'
  • Loop dimensions: 4' x 12'
  • Lead-in length: 50'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 16'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL16-18-50?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 50'
Loop Length Size 4' X 12'
Total Loop Length 32'
Wire Size 3/16"
SKU X-NL16-18-50
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file