National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 200' Lead-In for 16' Wide Driveways - X-NL16-18-200

National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 200' Lead-In for 16' Wide Driveways - X-NL16-18-200

Every safe automatic gate starts with reliable detection, and the National Loop Co. 32' Saw Cut Vehicle Detection Loop with 200' of lead-in to reach the detector spots cars and trucks without any physical contact, supplies one of the two means of entrapment protection UL 325 lists for gate systems. The wire lays into a slot cut about 1" deep in the asphalt or concrete, then the opening gets sealed. The 32' loop wraps into a 4' x 12' rectangle that fits 16' wide drives, including small apartment building lots and everyday 2-car suburban drives.
Part Number: X-NL16-18-200
$240.84 each $240.84 each
OR

Details

National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 200' Lead-In for 16' Wide Driveways - X-NL16-18-200

The National Loop Co. 32' Saw Cut Vehicle Detection Loop with 200' Lead-In is a preformed 18 AWG inductive vehicle detection loop that arrives ready to drop into a saw-cut slot. Wired to a compatible loop detector, the loop counts as one of the two means of entrapment protection UL 325 requires for gate operators, detecting the metal of any vehicle over the sensing area so the gate stops or reverses before contact. The install method is a 3/16" wide, 1" deep saw cut in the existing asphalt or concrete, with the loop laid in and sealed to finish the job. Across the 12' side it watches the full lane width, and down the 4' side it follows each vehicle's path, leaving about 2' of clearance at each edge for common 2-car suburban driveways and small apartment building lots.

Features:

  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations
  • Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of XLP-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range

Specifications:

  • Loop type: Saw cut
  • Total loop length: 32'
  • Loop dimensions: 4' x 12'
  • Lead-in length: 200'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 16'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL16-18-200?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 200'
Loop Length Size 4' X 12'
Total Loop Length 32'
Wire Size 3/16"
SKU X-NL16-18-200
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file