National Loop Co. 30' (4' X 11') Saw Cut Vehicle Detection Loop with 200' Lead-In for 15' Wide Driveways - X-NL15-18-200

National Loop Co. 30' (4' X 11') Saw Cut Vehicle Detection Loop with 200' Lead-In for 15' Wide Driveways - X-NL15-18-200

The National Loop Co. 30' Saw Cut Vehicle Detection Loop with 200' Lead-In alerts the gate operator the instant a vehicle crosses the wire. Loop detection of this type is what UL 325 looks for, counting as one of the two means of entrapment protection that keep automatic gates safe. A saw, a 1" cut, and a bead of sealant put this loop to work in finished asphalt or concrete. Shaped 4' x 11', its 30' of 18 AWG wire spans the lane on 15' wide driveways, from standard 2-car driveways on modest suburban lots.
Part Number: X-NL15-18-200
$237.14 each $237.14 each
OR
 

Details

National Loop Co. 30' (4' X 11') Saw Cut Vehicle Detection Loop with 200' Lead-In for 15' Wide Driveways - X-NL15-18-200

Because it arrives prewound and precut, the National Loop Co. 30' Saw Cut Vehicle Detection Loop with 200' Lead-In takes the guesswork out of adding vehicle detection to an existing driveway. Once a loop detector reads its signal, the loop covers the non-contact vehicle detection that UL 325 requires as one of the two means of entrapment protection for automated gates. Setup is a 3-step process: saw a 3/16" slot 1" deep in the pavement, press the loop in, and seal over it. With the 11' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits standard 2-car driveways on modest suburban lots.

Features:

  • Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations

Specifications:

  • Loop type: Saw cut
  • Total loop length: 30'
  • Loop dimensions: 4' x 11'
  • Lead-in length: 200'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 15'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL15-18-200?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 200'
Loop Length Size 4' X 11'
Total Loop Length 30'
Wire Size 3/16"
SKU X-NL15-18-200
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file