National Loop Co. 24' (4' X 8') Saw Cut Vehicle Detection Loop with 250' Lead-In for 12' Wide Driveways - X-NL12-18-250

National Loop Co. 24' (4' X 8') Saw Cut Vehicle Detection Loop with 250' Lead-In for 12' Wide Driveways - X-NL12-18-250

Sensing traffic through the pavement itself, the National Loop Co. 24' Saw Cut Vehicle Detection Loop with 250' of lead-in wire stands in as one of the two means of entrapment protection UL 325 demands of gate systems. The wire lays into a slot cut about 1" deep in the asphalt or concrete, then the opening gets sealed. The 24' loop wraps into a 4' x 8' rectangle that fits 12' wide drives, including comfortable single-car driveways and newer suburban builds.
Part Number: X-NL12-18-250
$251.51 each $251.51 each
OR

Details

National Loop Co. 24' (4' X 8') Saw Cut Vehicle Detection Loop with 250' Lead-In for 12' Wide Driveways - X-NL12-18-250

Wound from one continuous length of 18 AWG wire, the National Loop Co. 24' Saw Cut Vehicle Detection Loop with 250' Lead-In installs in an existing paved surface through a simple saw-cut slot. Paired with a compatible loop detector, it senses the metal mass of a passing car or truck and signals the gate operator to open, hold, or reverse, providing one of the two means of entrapment protection UL 325 requires for automated gates. Setup is a 3-step process: saw a 3/16" slot 1" deep in the pavement, press the loop in, and seal over it. With the 8' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits comfortable single-car driveways, newer suburban builds, and small business side lots.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field
  • Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection

Specifications:

  • Loop type: Saw cut
  • Total loop length: 24'
  • Loop dimensions: 4' x 8'
  • Lead-in length: 250'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 12'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL12-18-250?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 250'
Loop Length Size 4' X 8'
Total Loop Length 24'
Wire Size 3/16"
SKU X-NL12-18-250
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file