National Loop Co. 22' (4' X 7') Saw Cut Vehicle Detection Loop with 75' Lead-In for 11' Wide Driveways - X-NL11-18-75

National Loop Co. 22' (4' X 7') Saw Cut Vehicle Detection Loop with 75' Lead-In for 11' Wide Driveways - X-NL11-18-75

The National Loop Co. 22' Saw Cut Vehicle Detection Loop with 75' Lead-In picks up cars, trucks, and trailers as they cross the lane so the gate opens by itself. A saw, a 1" cut, and a bead of sealant put this loop to work in finished asphalt or concrete. Its 4' x 7' shape carries 22' of 18 AWG wire, the right footprint for 11' wide driveways including slightly wider suburban single-car drives and older neighborhoods with wider lot cuts.
Part Number: X-NL11-18-75
$147.65 each $147.65 each
OR
 

Details

National Loop Co. 22' (4' X 7') Saw Cut Vehicle Detection Loop with 75' Lead-In for 11' Wide Driveways - X-NL11-18-75

Installing the National Loop Co. 22' Saw Cut Vehicle Detection Loop with 75' Lead-In means sawing one slot, laying in a preformed 18 AWG loop, and sealing it. Once a loop detector reads its signal, the loop provides the non-contact vehicle detection automated gates rely on. Setup is a 3-step process: saw a 3/16" slot 1" deep in the pavement, press the loop in, and seal over it. With the 7' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits slightly wider suburban single-car drives and older neighborhoods with wider lot cuts.

Features:

  • Saves labor cost compared with winding a loop by hand in the field
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding

Specifications:

  • Loop type: Saw cut
  • Total loop length: 22'
  • Loop dimensions: 4' x 7'
  • Lead-in length: 75'
  • Slot size: 3/16" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 11'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL11-18-75?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 75'
Loop Length Size 4' X 7'
Total Loop Length 22'
Wire Size 3/16"
SKU X-NL11-18-75
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file