National Loop Co. 20' (4' X 6') Saw Cut Vehicle Detection Loop with 100' Lead-In for 10' Wide Driveways - X-NL10-18-100
Details
National Loop Co. 20' (4' X 6') Saw Cut Vehicle Detection Loop with 100' Lead-In for 10' Wide Driveways - X-NL10-18-100
Made for gate and access-control upgrades, the National Loop Co. 20' Saw Cut Vehicle Detection Loop with 100' Lead-In is an 18 AWG inductive loop, machine-wound and ready to seal into existing pavement. Paired with a compatible loop detector, it senses the metal mass of a passing car or truck and signals the gate operator to open, hold, or reverse, providing one of the two means of entrapment protection UL 325 requires for automated gates. Installation calls for sawing a 3/16" slot 1" deep into existing asphalt or concrete, laying the loop in the slot, and sealing it, with no hand-winding or turn counting required. With the 6' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits standard single-car suburban homes, duplex driveways, and small farm entrances.
Features:
- Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
- Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
- One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
- Factory-set turn count means optimal read range without any on-site adjustment
- Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
- Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
- More cost-effective than hand-wound loop installations
Specifications:
- Loop type: Saw cut
- Total loop length: 20'
- Loop dimensions: 4' x 6'
- Lead-in length: 100'
- Slot size: 3/16" wide x 1" deep
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 10'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Saw Cut |
|---|---|
| Lead-In Length | 100' |
| Loop Length Size | 4' X 6' |
| Total Loop Length | 20' |
| Wire Size | 3/16" |
| SKU | X-NL10-18-100 |
| Product Type | Saw Cut Preformed Loop |
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |
| Specification Sheet | Download PDF file |