National Loop Co. 92' (6' X 40') Direct Burial Vehicle Detection Loop with 20' Lead-In for 46' Wide Driveways - X-NL46-14-20

National Loop Co. 92' (6' X 40') Direct Burial Vehicle Detection Loop with 20' Lead-In for 46' Wide Driveways - X-NL46-14-20

Behind every loop detector sits a coil of wire, and the National Loop Co. 92' Direct Burial Vehicle Detection Loop with 20' of lead-in wire catches every vehicle that crosses its rectangle. There is no slot to cut, just a flat run of wire on the sub-base before the surface material covers it. The 6' x 40' rectangle carries 92' of detection wire, sized to 46' wide driveways at freight terminals, large agricultural processing plants, and wide estate boulevard gates.
Part Number: X-NL46-14-20
$267.15 each $267.15 each
OR

Details

National Loop Co. 92' (6' X 40') Direct Burial Vehicle Detection Loop with 20' Lead-In for 46' Wide Driveways - X-NL46-14-20

Designed to be paved over, the National Loop Co. 92' Direct Burial Vehicle Detection Loop with 20' Lead-In is a preformed 14 AWG inductive loop for new-surface installations. Wired to a compatible automated system, the loop detects the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Installation is a lay-and-pave job: set the loop on the graded sub-base, run the lead-in to the detector, and let the paving crew cover it. Its 40' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to freight terminals, large agricultural processing plants, and wide estate boulevard gates.

Features:

  • One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
  • Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
  • Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
  • Factory-set turn count means optimal read range without any on-site adjustment
  • More cost-effective than hand-wound loop installations
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters

Specifications:

  • Loop type: Direct burial
  • Total loop length: 92'
  • Loop dimensions: 6' x 40'
  • Lead-in length: 20'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 46'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL46-14-20?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 20'
Loop Length Size 6' X 40'
Total Loop Length 92'
SKU X-NL46-14-20
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC