Details

National Loop Co. 84' (6' X 36') Direct Burial Vehicle Detection Loop with 125' Lead-In for 42' Wide Driveways - X-NL42-14-125

Preformed and pave-ready, the National Loop Co. 84' Direct Burial Vehicle Detection Loop with 125' Lead-In is a 14 AWG inductive loop for direct burial under asphalt, concrete, or gravel. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Since the conduit protects the wire, the loop sits directly on the sub-base and gets buried under the new asphalt, concrete, or gravel surface. Its 36' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to wide industrial driveways, truck wash facilities, and large church or school parking lot entrances.

Features:

• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection

Specifications:

• Loop type: Direct burial
• Total loop length: 84'
• Loop dimensions: 6' x 36'
• Lead-in length: 125'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 42'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes