Details

National Loop Co. 72' (6' X 30') Direct Burial Vehicle Detection Loop with 250' Lead-In for 36' Wide Driveways - X-NL36-14-250

Every new paving project gains reliable vehicle detection with the National Loop Co. 72' Direct Burial Vehicle Detection Loop with 250' Lead-In, a preformed 14 AWG inductive loop. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator the non-contact detection that fills one of the two UL 325 entrapment protection slots. Installation is a lay-and-pave job: set the loop on the graded sub-base, run the lead-in to the detector, and let the paving crew cover it. The 30' side covers the travel lane with roughly 3' of clearance on each side, and the 6' side reads vehicles as they roll through, making it a fit for truck yards, heavy equipment facilities, and agricultural processing entrances.

Features:

• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment

Specifications:

• Loop type: Direct burial
• Total loop length: 72'
• Loop dimensions: 6' x 30'
• Lead-in length: 250'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 36'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes