Details

National Loop Co. 60' (6' X 24') Direct Burial Vehicle Detection Loop with 75' Lead-In for 30' Wide Driveways - X-NL30-14-75

Preformed and pave-ready, the National Loop Co. 60' Direct Burial Vehicle Detection Loop with 75' Lead-In is a 14 AWG inductive loop for direct burial under asphalt, concrete, or gravel. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator the non-contact detection that fills one of the two UL 325 entrapment protection slots. Crews place the loop on the prepared sub-base before paving, and the new asphalt, concrete, or gravel surface locks it in place. With the 24' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits double-wide commercial entrances, equipment yards, and storage facilities.

Features:

• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures

Specifications:

• Loop type: Direct burial
• Total loop length: 60'
• Loop dimensions: 6' x 24'
• Lead-in length: 75'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 30'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes