National Loop Co. 56' (6' X 22') Direct Burial Vehicle Detection Loop with 225' Lead-In for 28' Wide Driveways - X-NL28-14-225

National Loop Co. 56' (6' X 22') Direct Burial Vehicle Detection Loop with 225' Lead-In for 28' Wide Driveways - X-NL28-14-225

Hands-free gate operation depends on trustworthy detection, and the National Loop Co. 56' Direct Burial Vehicle Detection Loop with a 225' lead-in senses the metal of any car or truck that crosses it. There is no slot to cut, just a flat run of wire on the sub-base before the surface material covers it. The 6' x 22' rectangle carries 56' of detection wire, sized to 28' wide driveways at apartment complex entrances and farm or agricultural property gates.
Part Number: X-NL28-14-225
$358.78 each $358.78 each
OR
 

Details

National Loop Co. 56' (6' X 22') Direct Burial Vehicle Detection Loop with 225' Lead-In for 28' Wide Driveways - X-NL28-14-225

Preformed and pave-ready, the National Loop Co. 56' Direct Burial Vehicle Detection Loop with 225' Lead-In is a 14 AWG inductive loop for direct burial under asphalt, concrete, or gravel. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator dependable non-contact detection. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. Its 22' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to apartment complex entrances and farm or agricultural property gates.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
  • Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
  • Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
  • Predetermined number of turns removes the guesswork of achieving optimal read range
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Direct burial
  • Total loop length: 56'
  • Loop dimensions: 6' x 22'
  • Lead-in length: 225'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 28'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL28-14-225?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 225'
Loop Length Size 6' X 22'
Total Loop Length 56'
SKU X-NL28-14-225
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC