Details

National Loop Co. 56' (6' X 22') Direct Burial Vehicle Detection Loop with 200' Lead-In for 28' Wide Driveways - X-NL28-14-200

Built for sites where saw-cutting is not an option, the National Loop Co. 56' Direct Burial Vehicle Detection Loop with 200' Lead-In is a preformed 14 AWG loop encased in liquid-tight conduit. Once a loop detector reads its signal, the loop covers the non-contact vehicle detection that UL 325 requires as one of the two means of entrapment protection for automated gates. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. With the 22' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits apartment complex entrances and farm or agricultural property gates.

Features:

• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations

Specifications:

• Loop type: Direct burial
• Total loop length: 56'
• Loop dimensions: 6' x 22'
• Lead-in length: 200'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 28'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes