National Loop Co. 52' (6' X 20') Direct Burial Vehicle Detection Loop with 250' Lead-In for 26' Wide Driveways - X-NL26-14-250
Details
National Loop Co. 52' (6' X 20') Direct Burial Vehicle Detection Loop with 250' Lead-In for 26' Wide Driveways - X-NL26-14-250
Placed before the paving crew arrives, the National Loop Co. 52' Direct Burial Vehicle Detection Loop with 250' Lead-In is a 14 AWG inductive loop that disappears under the finished surface. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Since the conduit protects the wire, the loop sits directly on the sub-base and gets buried under the new asphalt, concrete, or gravel surface. Its 20' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to 3-car-wide residential drives and light commercial entries.
Features:
- Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
- Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
- Factory-set turn count means optimal read range without any on-site adjustment
- More cost-effective than hand-wound loop installations
- Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
- Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
Specifications:
- Loop type: Direct burial
- Total loop length: 52'
- Loop dimensions: 6' x 20'
- Lead-in length: 250'
- Wire gauge: 14 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 26'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Direct Burial |
|---|---|
| Lead-In Length | 250' |
| Loop Length Size | 6' X 20' |
| Total Loop Length | 52' |
| SKU | X-NL26-14-250 |
| Product Type | Direct Burial Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |