National Loop Co. 48' (6' X 18') Direct Burial Vehicle Detection Loop with 200' Lead-In for 24' Wide Driveways - X-NL24-14-200
Details
National Loop Co. 48' (6' X 18') Direct Burial Vehicle Detection Loop with 200' Lead-In for 24' Wide Driveways - X-NL24-14-200
Placed before the paving crew arrives, the National Loop Co. 48' Direct Burial Vehicle Detection Loop with 200' Lead-In is a 14 AWG inductive loop that disappears under the finished surface. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. The 18' side covers the travel lane with roughly 3' of clearance on each side, and the 6' side reads vehicles as they roll through, making it a fit for 2-car plus full walkway and church or small office lot entries.
Features:
- Factory-set turn count means optimal read range without any on-site adjustment
- More cost-effective than hand-wound loop installations
- Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
- Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
- Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
- Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
Specifications:
- Loop type: Direct burial
- Total loop length: 48'
- Loop dimensions: 6' x 18'
- Lead-in length: 200'
- Wire gauge: 14 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 24'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Direct Burial |
|---|---|
| Lead-In Length | 200' |
| Loop Length Size | 6' X 18' |
| Total Loop Length | 48' |
| SKU | X-NL24-14-200 |
| Product Type | Direct Burial Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |