Details

National Loop Co. 48' (6' X 18') Direct Burial Vehicle Detection Loop with 125' Lead-In for 24' Wide Driveways - X-NL24-14-125

Preformed and pave-ready, the National Loop Co. 48' Direct Burial Vehicle Detection Loop with 125' Lead-In is a 14 AWG inductive loop for direct burial under asphalt, concrete, or gravel. Working through a compatible loop detector, it detects the metal mass of vehicles above, satisfying the non-contact detection that UL 325 lists as one of its two required means of entrapment protection. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. With the 18' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits 2-car plus full walkway and church or small office lot entries.

Features:

• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures

Specifications:

• Loop type: Direct burial
• Total loop length: 48'
• Loop dimensions: 6' x 18'
• Lead-in length: 125'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 24'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes