Details

National Loop Co. 46' (6' X 17') Direct Burial Vehicle Detection Loop with 100' Lead-In for 23' Wide Driveways - X-NL23-14-100

Every new paving project gains reliable vehicle detection with the National Loop Co. 46' Direct Burial Vehicle Detection Loop with 100' Lead-In, a preformed 14 AWG inductive loop. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. With the 17' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits oversized residential drives and small business/customer entrances.

Features:

• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations
• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving

Specifications:

• Loop type: Direct burial
• Total loop length: 46'
• Loop dimensions: 6' x 17'
• Lead-in length: 100'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 23'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes