Details

National Loop Co. 40' (6' X 14') Direct Burial Vehicle Detection Loop with 200' Lead-In for 20' Wide Driveways - X-NL20-14-200

Made for new paving projects, the National Loop Co. 40' Direct Burial Vehicle Detection Loop with 200' Lead-In is a factory-wound 14 AWG loop that installs flat on the graded sub-base. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Since the conduit protects the wire, the loop sits directly on the sub-base and gets buried under the new asphalt, concrete, or gravel surface. Its 14' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to ranch entrances, farm properties, and estate homes with dual swing gates.

Features:

• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment

Specifications:

• Loop type: Direct burial
• Total loop length: 40'
• Loop dimensions: 6' x 14'
• Lead-in length: 200'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 20'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes