Details

National Loop Co. 38' (6' X 13') Direct Burial Vehicle Detection Loop with 250' Lead-In for 19' Wide Driveways - X-NL19-14-250

Built for sites where saw-cutting is not an option, the National Loop Co. 38' Direct Burial Vehicle Detection Loop with 250' Lead-In is a preformed 14 AWG loop encased in liquid-tight conduit. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Installation is a lay-and-pave job: set the loop on the graded sub-base, run the lead-in to the detector, and let the paving crew cover it. With the 13' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits 2-car drives with extra walkway room and estate-style rural homes.

Features:

• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures

Specifications:

• Loop type: Direct burial
• Total loop length: 38'
• Loop dimensions: 6' x 13'
• Lead-in length: 250'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 19'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes