Details

National Loop Co. 36' (6' X 12') Direct Burial Vehicle Detection Loop with 125' Lead-In for 18' Wide Driveways - X-NL18-14-125

Preformed and pave-ready, the National Loop Co. 36' Direct Burial Vehicle Detection Loop with 125' Lead-In is a 14 AWG inductive loop for direct burial under asphalt, concrete, or gravel. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. Its 12' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to roomy 2-car driveways and small commercial entries.

Features:

• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations
• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather

Specifications:

• Loop type: Direct burial
• Total loop length: 36'
• Loop dimensions: 6' x 12'
• Lead-in length: 125'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 18'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes