National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 250' Lead-In for 16' Wide Driveways - X-NL16-14-250

National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 250' Lead-In for 16' Wide Driveways - X-NL16-14-250

Sensing traffic through the pavement itself, the National Loop Co. 32' Direct Burial Vehicle Detection Loop with a 250' lead-in delivers reliable non-contact vehicle detection. The loop rests at grade and gets sealed in by the paving that follows, asphalt, concrete, or gravel included. With 32' of wire laid out 4' x 12', it covers the lane on 16' wide driveways such as common 2-car suburban driveways and small apartment building lots.
Part Number: X-NL16-14-250
$334.69 each $334.69 each
OR

Details

National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 250' Lead-In for 16' Wide Driveways - X-NL16-14-250

Skip the slot cutting entirely: the National Loop Co. 32' Direct Burial Vehicle Detection Loop with 250' Lead-In lays on the sub-base and gets paved over with the new surface. Once a loop detector reads its signal, the loop provides the non-contact vehicle detection automated gates rely on. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. Its 12' side spans the travel lane while the 4' side runs in the direction of traffic, leaving roughly 2' of clearance on each edge, an arrangement well suited to common 2-car suburban driveways and small apartment building lots.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
  • Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
  • Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
  • Predetermined number of turns removes the guesswork of achieving optimal read range
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Direct burial
  • Total loop length: 32'
  • Loop dimensions: 4' x 12'
  • Lead-in length: 250'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 16'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL16-14-250?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 250'
Loop Length Size 4' X 12'
Total Loop Length 32'
SKU X-NL16-14-250
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC