National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 100' Lead-In for 16' Wide Driveways - X-NL16-14-100

National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 100' Lead-In for 16' Wide Driveways - X-NL16-14-100

Every safe automatic gate starts with reliable detection, and the National Loop Co. 32' Direct Burial Vehicle Detection Loop with 100' of lead-in wire monitors the drive for traffic of any size, gives the gate system one of the two means of entrapment protection required by UL 325. Crews place it on the graded base, then pave right over it with asphalt, concrete, or gravel. A 4' x 12' arrangement gives it 32' of total wire, matching 16' wide driveways at common 2-car suburban driveways and small apartment building lots.
Part Number: X-NL16-14-100
$203.69 each $203.69 each
OR

Details

National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 100' Lead-In for 16' Wide Driveways - X-NL16-14-100

Placed before the paving crew arrives, the National Loop Co. 32' Direct Burial Vehicle Detection Loop with 100' Lead-In is a 14 AWG inductive loop that disappears under the finished surface. Wired to compatible automated system, the loop counts as one of the two means of entrapment protection UL 325 requires for gate operators, detecting the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Crews place the loop on the prepared sub-base before paving, and the new asphalt, concrete, or gravel surface locks it in place. With the 12' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits common 2-car suburban driveways and small apartment building lots.

Features:

  • Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
  • Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
  • Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
  • Predetermined number of turns removes the guesswork of achieving optimal read range
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Direct burial
  • Total loop length: 32'
  • Loop dimensions: 4' x 12'
  • Lead-in length: 100'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 16'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL16-14-100?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 100'
Loop Length Size 4' X 12'
Total Loop Length 32'
SKU X-NL16-14-100
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC