Details

National Loop Co. 30' (4' X 11') Direct Burial Vehicle Detection Loop with 100' Lead-In for 15' Wide Driveways - X-NL15-14-100

Every new paving project gains reliable vehicle detection with the National Loop Co. 30' Direct Burial Vehicle Detection Loop with 100' Lead-In, a preformed 14 AWG inductive loop. Once a loop detector reads its signal, the loop covers the non-contact vehicle detection that UL 325 requires as one of the two means of entrapment protection for automated gates. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. The 11' side covers the travel lane with roughly 2' of clearance on each side, and the 4' side reads vehicles as they roll through, making it a fit for standard 2-car driveways on modest suburban lots.

Features:

• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations
• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving

Specifications:

• Loop type: Direct burial
• Total loop length: 30'
• Loop dimensions: 4' x 11'
• Lead-in length: 100'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 15'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes