Details

National Loop Co. 24' (4' X 8') Direct Burial Vehicle Detection Loop with 75' Lead-In for 12' Wide Driveways - X-NL12-14-75

Preformed and pave-ready, the National Loop Co. 24' Direct Burial Vehicle Detection Loop with 75' Lead-In is a 14 AWG inductive loop for direct burial under asphalt, concrete, or gravel. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Installation is a lay-and-pave job: set the loop on the graded sub-base, run the lead-in to the detector, and let the paving crew cover it. With the 8' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits comfortable single-car driveways, newer suburban builds, and small business side lots.

Features:

• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations
• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters

Specifications:

• Loop type: Direct burial
• Total loop length: 24'
• Loop dimensions: 4' x 8'
• Lead-in length: 75'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 12'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes