National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 250' Lead-In for 11' Wide Driveways - X-NL11-14-250

National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 250' Lead-In for 11' Wide Driveways - X-NL11-14-250

The National Loop Co. 22' Direct Burial Vehicle Detection Loop with 250' Lead-In senses the metal of passing vehicles and tells the gate system to open. The signal gives the gate system reliable vehicle detection, a must for safe automatic operation. Crews place it on the sub-base of a new drive or lot, then pave right over it with asphalt, concrete, or gravel. Shaped 4' x 7', its 22' of 14 AWG wire spans the lane on 11' wide driveways, from older neighborhoods with roomier single-car drives, with 250' of lead-in wire to reach the gate controller.
Part Number: X-NL11-14-250
$315.24 each $315.24 each
OR
 

Details

National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 250' Lead-In for 11' Wide Driveways - X-NL11-14-250

Every new paving project gains reliable vehicle detection with the National Loop Co. 22' Direct Burial Vehicle Detection Loop with 250' Lead-In, a preformed 14 AWG inductive loop. Wired to a compatible automated system, the loop detects the metal of any vehicle over the sensing area so the gate stops or reverses before contact. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. With the 7' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits slightly wider suburban single-car drives and older neighborhoods with wider lot cuts.

Features:

  • Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
  • Predetermined number of turns removes the guesswork of achieving optimal read range
  • Saves labor cost compared with winding a loop by hand in the field
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
  • Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather

Specifications:

  • Loop type: Direct burial
  • Total loop length: 22'
  • Loop dimensions: 4' x 7'
  • Lead-in length: 250'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 11'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL11-14-250?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 250'
Loop Length Size 4' X 7'
Total Loop Length 22'
SKU X-NL11-14-250
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC