National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 200' Lead-In for 11' Wide Driveways - X-NL11-14-200
Details
National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 200' Lead-In for 11' Wide Driveways - X-NL11-14-200
Placed before the paving crew arrives, the National Loop Co. 22' Direct Burial Vehicle Detection Loop with 200' Lead-In is a 14 AWG inductive loop that disappears under the finished surface. Wired to a compatible automated system, the loop detects the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. The 7' side covers the travel lane with roughly 2' of clearance on each side, and the 4' side reads vehicles as they roll through, making it a fit for slightly wider suburban single-car drives and older neighborhoods with wider lot cuts.
Features:
- Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
- Predetermined number of turns removes the guesswork of achieving optimal read range
- Saves labor cost compared with winding a loop by hand in the field
- Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
- One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
- Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
Specifications:
- Loop type: Direct burial
- Total loop length: 22'
- Loop dimensions: 4' x 7'
- Lead-in length: 200'
- Wire gauge: 14 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 11'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Direct Burial |
|---|---|
| Lead-In Length | 200' |
| Loop Length Size | 4' X 7' |
| Total Loop Length | 22' |
| SKU | X-NL11-14-200 |
| Product Type | Direct Burial Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |