National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 100' Lead-In for 11' Wide Driveways - X-NL11-14-100

National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 100' Lead-In for 11' Wide Driveways - X-NL11-14-100

The National Loop Co. 22' Direct Burial Vehicle Detection Loop with 100' Lead-In triggers automatic gate operation the second a vehicle rolls over the wire. Crews place it on the sub-base of a new drive or lot, then pave right over it with asphalt, concrete, or gravel. Its footprint of 4' x 7' yields 22' of 14 AWG wire, sized to 11' wide driveways such as older neighborhoods with roomier single-car drives.
Part Number: X-NL11-14-100
$184.23 each $184.23 each
OR
 

Details

National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 100' Lead-In for 11' Wide Driveways - X-NL11-14-100

Because it ships fully assembled in heavy-duty conduit, the National Loop Co. 22' Direct Burial Vehicle Detection Loop with 100' Lead-In is ready to lay down the moment the sub-base is graded. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Crews place the loop on the prepared sub-base before paving, and the new asphalt, concrete, or gravel surface locks it in place. With the 7' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits slightly wider suburban single-car drives and older neighborhoods with wider lot cuts.

Features:

  • Factory-set turn count means optimal read range without any on-site adjustment
  • More cost-effective than hand-wound loop installations
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
  • Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
  • Fully assembled at the factory, so there is nothing to wind, count, or connect before paving

Specifications:

  • Loop type: Direct burial
  • Total loop length: 22'
  • Loop dimensions: 4' x 7'
  • Lead-in length: 100'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 11'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number X-NL11-14-100?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 100'
Loop Length Size 4' X 7'
Total Loop Length 22'
SKU X-NL11-14-100
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC