Details

National Loop Co. 88' (6' X 38') Direct Burial Vehicle Detection Loop with 30' Lead-In for 44' Wide Driveways - K-NL44-14-30

Made for new paving projects, the National Loop Co. 88' Direct Burial Vehicle Detection Loop with 30' Lead-In is a factory-wound 14 AWG loop that installs flat on the graded sub-base. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator the non-contact detection that fills one of the two UL 325 entrapment protection slots. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. The 38' side covers the travel lane with roughly 3' of clearance on each side, and the 6' side reads vehicles as they roll through, making it a fit for logistics/warehouse entrances, large farm commodity yards, and wide municipal entries.

Features:

• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations
• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving

Specifications:

• Loop type: Direct burial
• Total loop length: 88'
• Loop dimensions: 6' x 38'
• Lead-in length: 30'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 44'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes