National Loop Co. 80' (6' X 34') Direct Burial Vehicle Detection Loop with 75' Lead-In for 40' Wide Driveways - K-NL40-14-75

National Loop Co. 80' (6' X 34') Direct Burial Vehicle Detection Loop with 75' Lead-In for 40' Wide Driveways - K-NL40-14-75

The National Loop Co. 80' Direct Burial Vehicle Detection Loop with 75' Lead-In spots vehicles at the gate line without buttons, cameras, or physical contact. That detection keeps the gate from closing on a car in its path. Rather than cutting finished pavement, you set it on the base and let the new surface lock it in place. A 14 AWG perimeter of 80' wraps into a 6' x 34' footprint made for 40' wide drives, from distribution centers, heavy equipment dealerships, and semi-truck yards.
Part Number: K-NL40-14-75
$320.80 each $320.80 each
OR

Details

National Loop Co. 80' (6' X 34') Direct Burial Vehicle Detection Loop with 75' Lead-In for 40' Wide Driveways - K-NL40-14-75

Placed before the paving crew arrives, the National Loop Co. 80' Direct Burial Vehicle Detection Loop with 75' Lead-In is a 14 AWG inductive loop that disappears under the finished surface. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. With the 34' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits distribution centers, heavy equipment dealerships, and semi-truck yards.

Features:

  • Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
  • Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
  • Factory-set turn count means optimal read range without any on-site adjustment
  • More cost-effective than hand-wound loop installations
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail

Specifications:

  • Loop type: Direct burial
  • Total loop length: 80'
  • Loop dimensions: 6' x 34'
  • Lead-in length: 75'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 40'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number K-NL40-14-75?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 75'
Loop Length Size 6' X 34'
Total Loop Length 80'
SKU K-NL40-14-75
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC