Details

National Loop Co. 68' (6' X 28') Direct Burial Vehicle Detection Loop with 100' Lead-In for 34' Wide Driveways - K-NL34-14-100

Preformed and pave-ready, the National Loop Co. 68' Direct Burial Vehicle Detection Loop with 100' Lead-In is a 14 AWG inductive loop for direct burial under asphalt, concrete, or gravel. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator the non-contact detection that fills one of the two UL 325 entrapment protection slots. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. Its 28' side detects a vehicle anywhere across the lane, while the 6' side tracks its passage, with roughly 3' of edge clearance, ideal for industrial or municipal lots and large estate entrances.

Features:

• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather

Specifications:

• Loop type: Direct burial
• Total loop length: 68'
• Loop dimensions: 6' x 28'
• Lead-in length: 100'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 34'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes