National Loop Co. 60' (6' X 24') Direct Burial Vehicle Detection Loop with 20' Lead-In for 30' Wide Driveways - K-NL30-14-20

National Loop Co. 60' (6' X 24') Direct Burial Vehicle Detection Loop with 20' Lead-In for 30' Wide Driveways - K-NL30-14-20

Keeping an automatic gate both safe and convenient, the National Loop Co. 60' Direct Burial Vehicle Detection Loop with a 20' lead-in senses the metal of any car or truck that crosses it. There is no slot to cut, just a flat run of wire on the sub-base before the surface material covers it. The 6' x 24' rectangle carries 60' of detection wire, sized to 30' wide driveways at wide commercial entrances, equipment yards, and storage facilities.
Part Number: K-NL30-14-20
$227.53 each $227.53 each
OR
 

Details

National Loop Co. 60' (6' X 24') Direct Burial Vehicle Detection Loop with 20' Lead-In for 30' Wide Driveways - K-NL30-14-20

Built for sites where saw-cutting is not an option, the National Loop Co. 60' Direct Burial Vehicle Detection Loop with 20' Lead-In is a preformed 14 AWG loop encased in liquid-tight conduit. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. Its 24' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to double-wide commercial entrances, equipment yards, and storage facilities.

Features:

  • More cost-effective than hand-wound loop installations
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
  • Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
  • Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
  • Predetermined number of turns removes the guesswork of achieving optimal read range

Specifications:

  • Loop type: Direct burial
  • Total loop length: 60'
  • Loop dimensions: 6' x 24'
  • Lead-in length: 20'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 30'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number K-NL30-14-20?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 20'
Loop Length Size 6' X 24'
Total Loop Length 60'
SKU K-NL30-14-20
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC