National Loop Co. 52' (6' X 20') Direct Burial Vehicle Detection Loop with 20' Lead-In for 26' Wide Driveways - K-NL26-14-20
Details
National Loop Co. 52' (6' X 20') Direct Burial Vehicle Detection Loop with 20' Lead-In for 26' Wide Driveways - K-NL26-14-20
Every new paving project gains reliable vehicle detection with the National Loop Co. 52' Direct Burial Vehicle Detection Loop with 20' Lead-In, a preformed 14 AWG inductive loop. Working through a compatible loop detector, it detects the metal mass of vehicles above. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. Its 20' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to 3-car-wide residential drives and light commercial entries.
Features:
- Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
- Predetermined number of turns removes the guesswork of achieving optimal read range
- Saves labor cost compared with winding a loop by hand in the field
- Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
- One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
- Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
Specifications:
- Loop type: Direct burial
- Total loop length: 52'
- Loop dimensions: 6' x 20'
- Lead-in length: 20'
- Wire gauge: 14 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 26'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Direct Burial |
|---|---|
| Lead-In Length | 20' |
| Loop Length Size | 6' X 20' |
| Total Loop Length | 52' |
| SKU | K-NL26-14-20 |
| Product Type | Direct Burial Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |